At-Home Permanent Jewelry, Without the Appointment
Love the look of permanent jewelry but don't want to book a welding appointment?
A DIY permanent bracelet kit gives you another option. You can size and finish a clasp-free bracelet at home without a welder, sparks, or studio equipment.
The Pretty Pickie At-Home Permanent Bracelet Kit includes everything you need to make two custom-fit, permanent-style bracelets using our Infinity Link closure system.
It's the same clean, everyday style people love about permanent jewelry, but designed to be done at home.
Quick answer: A DIY permanent bracelet kit lets you create a custom-fit, clasp-free bracelet at home. Instead of welding the chain closed, the Pretty Pickie kit uses a small Infinity Link connector that keeps the bracelet together until you choose to remove it.
What Is a DIY Permanent Bracelet Kit?
Traditional permanent jewelry is usually fitted by a jewelry artist. The artist measures a chain around your wrist and welds a tiny connecting ring closed so the bracelet has no regular clasp.
A DIY permanent bracelet kit creates a similar clasp-free look without welding.
With the Pretty Pickie kit, you:
- Choose the chain you want to wear.
- Measure it to fit your wrist.
- Trim the extra chain.
- Connect the two ends.
- Close the Infinity Link using the included pliers.
Once finished, you have a simple continuous bracelet without a bulky lobster clasp.
If you're ready to install yours, use our step-by-step DIY permanent bracelet instructions and video.
Is DIY Permanent Jewelry Actually Permanent?
It's better described as permanent-style jewelry.
Traditional permanent jewelry is welded closed. The Pretty Pickie at-home version is not welded. Instead, a small connector closes the bracelet into one continuous loop.
Once you put it on, you don't open and close it every day like a regular bracelet. It stays on until you decide to remove it.
And yes—you can remove it if necessary. More on that below.
Why Choose At-Home Permanent Jewelry?
The biggest advantage is convenience. You get the permanent-jewelry look without having to find a studio or schedule an appointment.
- No appointment: Make your bracelet whenever you want.
- No welding: No welder, heat, sparks, or special equipment.
- Custom fit: Measure the chain for your own wrist.
- Two bracelets: Keep both or make one with someone else.
- Clasp-free look: No large lobster clasp hanging from the chain.
- Giftable: Make matching bracelets with a friend, sister, daughter, partner, or bridesmaid.
Why This Isn't a Typical DIY Jewelry Kit
A lot of jewelry-making kits are really craft kits. You make something once, have fun doing it, and may or may not wear it afterward.
That isn't what we wanted here.
The Pretty Pickie kit was designed around the permanent jewelry experience: a simple chain, a custom fit, and a clean closure that's meant for everyday wear.
Each kit includes:
- 2 bracelet chains
- Infinity Link connectors
- Installation pliers
- Step-by-step instructions
- Access to our installation video
You aren't buying a box of beads and string. You're getting the pieces needed to make two finished permanent-style bracelets at home.
How Does the Infinity Link Work?
The Infinity Link is the small connector that joins the ends of your bracelet.
With traditional permanent jewelry, that connecting point is welded closed. With the at-home kit, you close the connector with the included pliers instead.
Once closed correctly, the bracelet stays in one continuous loop rather than opening and closing with a normal clasp.
No welding machine required.
Before installing your bracelet, we recommend watching the installation video and step-by-step guide from beginning to end.
Gold or Silver: What Is the Kit Made From?
The at-home kit is available in both gold and silver finishes.
Gold
The gold option uses 18K gold-plated stainless steel. It gives you the warm look of gold with a durable stainless steel base underneath.
Silver
The silver option is polished stainless steel without gold plating.
There are also several chain styles to choose from, including dainty and more noticeable options, so you can pick the look that fits you best.
See the current chain styles and colors →
How Long Does It Take to Put On?
Most installations take about 10 to 15 minutes.
The most important part isn't speed. Measure carefully and make sure you like the fit before you close the connector.
Once the bracelet is closed, it isn't meant to adjust like a normal clasp bracelet.
So before the final step:
- Check that it isn't too tight.
- Make sure it can't easily slide over your hand.
- Move your wrist around and make sure the fit feels comfortable.
Will It Look Like Real Permanent Jewelry?
That's the idea.
When installed correctly, there is no traditional lobster clasp hanging from the bracelet. Instead, you get a clean, continuous chain similar to the look of a professionally welded permanent bracelet.
The important difference is how the bracelet is closed: traditional permanent jewelry is welded, while this kit uses the Infinity Link system.
Can You Shower or Swim With It?
Yes. The chains are made for normal everyday wear, including showers, sweat, and water.
The gold styles use gold-plated stainless steel, while the silver styles use polished stainless steel.
As with any everyday jewelry, rinsing your bracelet after exposure to chlorine, salt water, sunscreen, or other products can help keep buildup off the surface.
How Long Does an At-Home Permanent Bracelet Last?
The bracelets are designed for long-term daily wear. With normal use, they can last for years.
Of course, permanent doesn't mean indestructible. A bracelet can still snag, break, or be intentionally removed just like professionally welded permanent jewelry.
The current Pretty Pickie kit is designed for 3+ years of normal daily wear.
Can You Remove a DIY Permanent Bracelet?
Yes.
If you need to take it off, the connecting link can be cut with scissors or jewelry pliers.
That can be important for medical procedures, sports, work requirements, or simply because you decide you're ready to take the bracelet off.
If you have an MRI or medical procedure coming up, read our guide to permanent jewelry and MRI safety and always follow the instructions from your medical facility.
At-Home Permanent Jewelry vs. Welded Permanent Jewelry
| Feature | At-Home Kit | Studio Permanent Jewelry |
|---|---|---|
| Closure | Infinity Link | Welded connecting ring |
| Welder needed? | No | Yes |
| Appointment? | No | Usually |
| Custom fit? | Yes, you size it | Yes, jeweler sizes it |
| Can it be removed? | Yes | Yes |
Who Is a DIY Permanent Bracelet Kit Good For?
It's a good option for anyone who likes permanent jewelry but doesn't want—or doesn't have access to—a welding appointment.
It's especially fun for:
- Best friends
- Couples
- Sisters
- Moms and daughters
- Bridesmaids
- Birthdays
- Girls' nights
- Long-distance friends
- Anyone who wants two bracelets to stack
Because each kit includes two bracelets, you can make them together or keep both for yourself.
DIY Permanent Jewelry FAQs
Do you need a welder for DIY permanent jewelry?
No. The Pretty Pickie kit is specifically designed to create a permanent-style bracelet without a jewelry welder.
How many bracelets come in the kit?
Each Pretty Pickie At-Home Permanent Bracelet Kit includes enough chain and connectors to make two bracelets.
Does the kit include tools?
Yes. Installation pliers are included, along with the connectors, bracelet chains, instructions, and access to the installation video.
Can beginners use it?
Yes. The kit was designed for people who don't have professional jewelry-making or welding experience. Most installations take about 10 to 15 minutes.
Does it have a regular bracelet clasp?
No. The bracelet is designed to create a continuous, clasp-free look using the Infinity Link connector.
Can I take the bracelet off later?
Yes. If you need or want to remove it, you can cut the connecting link with scissors or jewelry pliers.
Can I put it back on after cutting it off?
The chain itself may still be reusable if it hasn't been damaged, but you'll need a suitable connector to close it again.
Is this the same thing as welded permanent jewelry?
No. The finished look is similar, but the attachment method is different. Traditional permanent jewelry uses a welder. The Pretty Pickie at-home kit uses a no-welding connector system.
Is a DIY Permanent Bracelet Kit Worth It?
If you like permanent jewelry but don't want to make a studio appointment every time you want a new bracelet, an at-home kit can make a lot of sense.
You get two custom-fit bracelets, the tools to install them, and the experience of making them yourself or with someone else.
And because there's no welding involved, you can do it wherever you are.
Make Your Own Permanent-Style Bracelets
Two bracelets. Custom fit. No welding appointment.
Shop the At-Home Permanent Bracelet Kit →
Already have your kit? View the installation guide →
